HOT-AIR DRYING OF MEDICINAL MATERIALS BASED ON COUPLED HEAT-MOISTURE AND MOVING-BOUNDARY MODELS
Keywords:
Hot-air drying, Medicinal materials, Heat-moisture coupling, Finite volume method, Weibull temperature model, Moving boundaryAbstract
Hot-air drying of cylindrical medicinal materials couples heat conduction, moisture diffusion, and shrinkage, so a fixed-geometry model may misestimate drying completion. This study develops a radial heat-moisture model that progresses from constant properties to temperature- and moisture-dependent properties and an arbitrary Lagrangian-Eulerian (ALE) moving boundary. A vertex-centred finite-volume scheme, Rannacher-started Crank-Nicolson integration, Picard iteration, and diffusion-potential interface fluxes are used; ambient temperature is fitted with a Weibull function, and grid and balance checks assess numerical consistency. In the constant-property baseline at 1,800 s, center and surface temperatures are 33.5753 and 36.7856 °C, with moisture contents of 2.5500 and 1.5102 kg/kg. At 3 h, the variable-property model predicts 49.8495 and 49.9664 °C and moisture contents of 1.7662 and 1.0081 kg/kg. The maximum-moisture endpoint is 57.4730 h for fixed radius and 51.0852 h with shrinkage as radius falls from 2.0 to 1.2 cm. Temperature-fit RMSE is 0.1447 °C (R² = 0.999197). The results indicate that moving geometry changes predicted process duration; internal moisture and radius measurements are needed to validate the estimates beyond the tested assumptions.References
[1] Wu L, Qi J, Sun L, et al. Design of and experimental study on drying equipment for Fritillaria ussuriensis. Applied Sciences, 2025, 15(15): 8427.
[2] Sinha R, Thakur A D, Raj R. Investigating drying behavior and quality of Neem leaves using a novel biomass gasification-powered climate control unit with built-in humidity control. International Communications in Heat and Mass Transfer, 2024, 158: 107888.
[3] Yadav D K, Arora V K, Gupta A. Experimental investigation on the thermal appraisal and sustainability indicator of heat pipe-based indirect solar dryer during Giloy (Tinospora cardifolia) drying. Thermal Science and Engineering Progress, 2024, 47: 102335.
[4] Sun D, Hu R, Wang P, et al. Integrated simulation method construction and process optimization for hot air drying of shiitake mushrooms. LWT, 2024, 206: 116577.
[5] Das R, Islam M, Saini P, et al. Finite element modeling of banana slices in convective drying, studies on isotropic shrinkage kinetics using Arbitrary Lagrangian-Eulerian (ALE) approach. Thermochimica Acta, 2025, 749: 180024.
[6] Chen K K, Torki M, Ghanbarian D, et al. Numerical simulation and study on heat and mass transfer in a hybrid ultrasound/convective dryer. Journal of Food Science and Technology, 2024, 61(6): 1094-1104.
[7] Kaveh M, Zomorodi S, Szymanek M, et al. Determination of drying characteristics and physicochemical properties of mint (Mentha spicata L.) leaves dried in refractance window. Foods, 2024, 13(18): 2867.
[8] Das R, Prasad K. Finite element modeling in heat and mass transfer of potato slice dehydration, nonisotropic shrinkage kinetics using arbitrary Lagrangian-Eulerian algorithm and artificial neural network. Journal of Food Process Engineering, 2024, 47(2): e14545.
[9] Suresh K, Kumaraswamy M, Sundaravadanam H, et al. Engineering perspectives on drying technologies of medicinal plants: A review on kinetic modelling and bioactive compounds retention. Applied Science and Engineering Progress, 2026, 19(1): 7900.
[10] Ali I. Two-dimensional numerical modeling and simulation of heat and moisture transfer during drying. AIMS Mathematics, 2026, 11(3): 8762-8791.